LC-LC Multimode Fiber Jumpers

All Fiber Optic Jumpers are available in both 62.5 and 50 micron. Also if you do not see the specific Fiber Optic Jumper that you are looking for we can custom tailor any jumper variation that you may require.

Multimode is an optical fiber with a core (25-200 microns) that supports several modes. The core commonly 62.5/125 or 50/125 is stamped on the cable jacket. Always check equipment requirements or the fiber optic cable jacket to determine which core size you need. Multimode is most commonly used for lower speed, short distance applications.

Simplex cable has a single fiber

Duplex has two fibers usually side by side in style.

Most Commonly used Connectors are LC,SC, ST, MTRJ and MPO

If you have questions about a highly complex fiber optic assembly contact your sales rep at GAU today.

Global Access Unlimited stocks fiber optic patchcord and pigtails in many lengths, colors and connector types. Including but not limited to PVC, Plenum, Aqua, Bend insensitive, ruggedized, Milspec, and custom. Our fiber optic patch cable jumpers and assemblies are manufactured in an ISO 9001-2000 certified factories using only the highest quality components. As a tier one Draka distributor we utilize Draka fiber. Each fiber optic patch cable jumper is fully tested, to Telceordia standards, for insertion loss and back reflection prior to shipment. Singlemode fiber optic cables are also tested for APEX, radius and undercut. Corning Fiber Cable Assemblies are also available. GAU has RUS compliant Buy American Act product ready to ship. When your bid demands low pricing we have offshore product with short lead times, call for a fast a free quote today. We can ship most fiber optic jumpers and custom made, even highly complex FIBER OPTIC JUMPERS the same day.

Fiber Optic cabling is made with glass fibers. There is very little variation in the signal that they carry over long distances. The full potential speed fiber optic cabling can carry has never been reached even with Gigabit technology. These cables have greater bandwidth than electrical transmission through wires.

In recent years it has become apparent that fiber-optics are steadily replacing copper wire as an appropriate means of communication signal transmission. They span the long distances between local phone systems as well as providing the backbone for many network systems. Other system users include cable television services, university campuses, office buildings, industrial plants, and electric utility companies. A fiber-optic system is similar to the copper wire system that fiber-optics is replacing. The difference is that fiber-optics use light pulses to transmit information down fiber lines instead of using electronic pulses to transmit information down copper lines. Looking at the components in a fiber-optic chain will give a better understanding of how the system works in conjunction with wire based systems.

10 Gigabit FIBER OPTIC JUMPERS- 10 Gigabit Fiber Optic Jumpers-MPO patch cords are 12-strand multi-fiber patch cords. Cleverly designed with precision molded MT ferrules, our female MPO assemblies are made with precise housings ensuring perfect fiber alignment during mating with MPO cassettes. Its high density design allows for use in compact applications, ideal for data centers.

Are you trying to decide between fiber optic and coaxial cabling for your computer networking application? If the not-so-mere fact that fiber optics have completely revolutionized communications over the past couple of decades isn’t enough for you then call your highly trained sales executive at GAU for more details. Also ask about the first time buyer program and annual rebate program available though manufacturers like Draka.

In stock are military grade FIBER OPTIC JUMPERS. These military grade FIBER OPTIC JUMPERS use M28876-27 Connectors offer rugged military and industrial optical connectors for shipboard, indoor and outdoor requirements. These connectors are designed to perform in a wide range of environmental conditions. Plugs and receptacles have several key options to prevent configuration problems in systems using multiple connectors. The M28876 series products are available with cadmium-plated aluminum and stainless steel. Stainless steel may be an excellent solution for applications where contact with salt spray and other corrosive elements is possible. The M28876 series of connectors uses the M29504/14 & /15 terminals.

As we move towards the future, our fiber manufacturer partners seek to solve problems in today’s crowded telecom room and work area by providing small form factor (SFF) solutions. Our fiber work area outlet boxes fill the need for a smooth transition in bringing fiber to the desktop. The addition of fiber optic MT-RJ products in 1999, followed by the incorporation of LC products in 2001, shows our commitment to providing complete quality fiber solutions for all your needs.

Global has several fiber optic custom fiber optic assembly labs selections as well as competitive prices. To ensure the products’ performance, our manufacturing process utilizes high quality connectors with ceramic ferrules (Or Phosphor Bronze if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations. We offer the finest quality FIBER OPTIC JUMPERS from several manufacturers including Draka our strategic partner, as well as Corning, Emerson, 3M, ADC,Telect and more. GAU offers 10 gig FIBER OPTIC JUMPERS and 10 gigabit fiber optic jumpers in both multimode and singlemode. Bendbright bend insensitive fiber jumpers are also available. We stock one of the largest arrays of singlemode FIBER OPTIC JUMPERS and multimode fiber optic jumpers in the USA.

Multimode fiber gives you high bandwidth at high speeds over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable’s core typically 850 or 1300nm. Typical multimode fiber core diameters are 50, 62.5, and 100 micrometers. However, in long cable runs (greater than 3000 feet [914.4 ml), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission. The use of fiber-optics was generally not available until 1970 when Corning Glass Works was able to produce a fiber with a loss of 20 dB/km. It was recognized that optical fiber would be feasible for telecommunication transmission only if glass could be developed so pure that attenuation would be 20dB/km or less. That is, 1% of the light would remain after traveling 1 km. Today’s optical fiber attenuation ranges from 0.5dB/km to 1000dB/km depending on the optical fiber used. Attenuation limits are based on intended application.

Fiber Optic cabling is constructed with 3 concentric layers: The “core” is the central region of an optical fiber through which light is transmitted. Mode is a single electromagnetic field pattern that travels in fiber.

Our design staff can assist you, or consult with your customers, to bring an idea from concept to finished product.