CAT5e Cable

                              Call Today!! Call Today!! Call Today!! Call Today!!

Bandwidth:

Doubling the bandwidth is adding two times the number of lanes on a highway. The tendencies of the times of yore and the predictions in the future indicate that data rates still have been doubling every 18 months. Current applications running at 1 GB/s are actually pushing the confines of category 5e cabling. As streaming media functions these kinds of video and again multimedia become ordinary, the demands intended for faster data rates will increase and generate new applications that promote from the advanced bandwidth accessible by category 6. This is exactly what happened within the early on 90’s when the advanced bandwidth of category 5 cabling compared to category 3 triggered most LAN applications to desire the better media to permit simpler, cost efficient, higher pace LAN applications, such 100BASE-TX. Note: Bandwidth is clear as the highest frequency up to that positive power sum ACR (Attenuation to Crosstalk Ratio) being greater than zero.

What is the common difference between category 5e and category 6?

The general difference between the two categories 5e and category 6 is in the transmission performance, and broadening of the available bandwidth from 100 MHz for category 5e to 200 MHz for category 6. This involves improved insertion passing, nearby end crosstalk (NEXT), return loss, and identical level far end crosstalk (ELFEXT). These improvements offer a superior signal-to-noise ratio, enabling elevated reliability for present applications and advanced data rates for upcoming applications.

Category 6 Cable Questions

How do I tell the difference between cat 5e cable and cat 6 cables with different ratings?

Category 5e requires a specification of up to 100 mhz. Cat 5 e and cat 6 Cables have the ability to be test up to any and all frequency that the test equipment allow meaning what the test equipment is specifically built for however such measurements are pointless if void of context applications and structured cabling standards. As most know category 6 standard sets the minimum requirements for up to 250 MHz for cables, all connecting hardware, all patch cords, especially for specified channels and permanent industrial links. This guarantees proper and reasonable performance that can be applied to applications.