All SC, LC, and MT-RJ adapters come with retaining clips for simple, snap-in installation, and, also, with screw-mounting seats; ST adapters come with a built in retainer ring. All adapters with plastic bodies (SC-, LC-, and MT-RJ-type) are color-coded per ANSI/TIA-568-C.3 – 62.5- and 50-µm multimode adapters are beige in color, 50-µm multimode OM3 – aqua, singlemode PC and UPC – blue, singlemode APC – green.

KEY FEATURES

• ST, SC, LC, and MT-RJ
• Zirconia ceramic and phosphor bronzed sleeves
• All adapters are offered with retaining clips, screw-mounting seats, or with a retainer ring
• Standardized color-coating

KEY FEATURES

• ST, SC, LC, and MT-RJ
• Phosphor bronze and zirconia ceramic sleeves
• All adapters are provided with retaining clips, screw-mounting seats, or with a retainer ring
• Standard color-coded

Global’s field-mountable pre-polished connectors reduce installation time considerably, and remove the need to use adhesives and polishing. This unique quality makes it possible to eliminate field termination mistakes and to supply equal quality of connection performed by an experienced installer and apprentice.

Available in multimode (62.5-µm (OM1), 50-µm (OM2), 50-µm laser-optimized (LO) (OM3/OM4), and singlemode ST, SC, and LC versions, our connectors feature a polished ferrule with a factory-installed fiber stub, which splices in the field to distribution cable fibers using an integrated alignment mechanism and index-matching gel. The alignment mechanism is are initiated with the help of a termination clip, which is provided with each connector.  After termination, the clip is detached. Connectors are designed to terminate 250- and 900-µm buffered fibers, and 2.0- and 3.0-mm jacketed fibers.

KEY FEATURES

• Field installation procedures diminished and simplified – pre-polished ferrule with a factory-installed fiber stub, integrated alignment mechanism and index-matching gel
• Offered in:

- 62.5-µm multimode (OM1)

- 50-µm multimode (OM2)

- 50-µm laser-optimized (LO multimode (OM3/OM4)

• ST, SC, and LC simplex connectors
• Termination clip and detailed installation instructions are supplied with each connector;
• Designed to terminate 250-µm and 900-µm buffered fibers, 2.0-mm and 3.0-mm jacketed fibers.
• Plastic body color-coding per ANSI/TIA-598-C.3
• Slim-profile boots with durable flexible cable strain relief

Specify optical fiber adapter plates for ST-, SC-, MT-RJ- or LC-type connections. Adapter plates are compatible with all Signamax wall and rack mount optical fiber enclosures and available in 6 simplex and duplex, 8 simplex and duplex and 6 quad configurations with fiber counts of up to 24 per adapter plate. They mount easily by means of plunger locks (“pushpins”). ST, SC and LC connector plates can be equipped with 62.5-µm and 50-µm adapters suitable for multimode applications or a singlemode only version is available with adapters outfitted with zirconia ceramic sleeves. Our SC and LC 10G multimode laser optimized adapter uses zirconia ceramic sleeves.

KEY FEATURES

• ST-, SC-, MT-RJ-, LC-type connections
• Compatible with all Signamax wall and rack mount optical fiber enclosures
• Available in- 6 simplex and duplex- 8 simplex and duplex- 6 quad configurations
• Fiber counts up to 24 per adapter plate
• Equipped with plunger locks (“pushpins”)
• Phosphor bronze and zirconia ceramic sleeves
• Adapters are standard color-coded